Lincoln Injector Accessories

Injector Accessories

Injector connector tube

Permits application of combined discharge of two or more Series SL-V, SL-1, SL-41 or SL-44 injectors through one feed line. Used where bearing size is such that multiple injector output is required.

  • 1/8 in. NPT(M) fittings at each end
  • Carbon steel construction
Model For injector series Connections
81646 SL-V, SL-V XL OR SL1, SL41, SL44 1/8 in. NPTF (M)
274824 SL-1 TO SL-V connection 1/8 in. NPTF (M)
 IJ1

Injector outlet adapter

Converts individual injector lubricant outlet when standard 1/8 in. O.D. tube is not desired.

  • For injector series SL32, SL33, SL42, SL43
  • Carbon steel construction
Model Connections
14988 1/8 in. NPTF(F)
84200 1/4 in. O.D. Tube
14994 1/8 in. NPTF (M)
249281 4 mm tube
249292 6 mm tube
 IJ2

Manual grease fitting adapter

Allows manual lubrication of the machine between normal system cycles.

  • For injector series SL32, SL33, SL42, SL43
  • Carbon steel construction with nitrile seals
Model Connections
14988 1/8 in. NPTF(F)
84200 1/4 in. O.D. Tube
14994 1/8 in. NPTF (M)
249281 4 mm tube
249292 6 mm tube
 IJ3

Injector locking cap

Carbon steel locking caps set injectors to fixed output.

Model For Injector Series Fixed Volume Output
 cu. in. cc
102781 SL32, SL43 .002 .033
102781 SL33, SL42 .003 .049
 IJ4

Injector cover caps

Injector cover caps are designed to protect the injector from dirt, harmful liquids and fumes.

  
Model For Injector Series Covers Material Length Diameter
    in. mm in. ID mm
273088 SL-V Indicator stem Polycarbonate 1.5 38.1 .715 18.2
273089 SL-V XL Indicator stem Polycarbonate 2.2 55.9 .715 18.2
83272 SL1, SL44 Indicator stem Vinyl 1.5 38.1 .69 17.5
83730 SL11 Indicator stem Vinyl 2.0 50.8 1.125 28.6
68483 SL32, SL33, SL42, SL43 Measuring chamber Vinyl 1.25 31.2 .5 12.7
90537 SL1, SL41, SL44 Injector body Aluminum 3.25 82.6 1.19 30.2

Closure plugs for injectors and manifolds

For use in plugging lubricant outlets of injectors and manifolds.

 IJS1  IJS2
Style 1 Style 2
 
Model Style Material Thread size A B
    in.  in. mm in. ID mm
12698* 1 Carbon steel 5/16-24 5/16 7.9 1/2 12.7
12698-9* 2 Stainless steel 5/16-24 5/16 7.9 1/2 12.7
12511 2 Carbon steel 1/8 PTF 7/16 11.1 7/16 11.1
12511-9 2 Stainless steel 1/8 PTF 7/16 11.1 7/16 11.1
67044 2 Stainless steel 3/8 NPT 7/16 11.1 13/16 20.6
67007 2 Stainless steel 1/4 NPT 3/16 4.8 5/8 15.9
67007-9 2 Stainless steel 1/4 NPT 3/16 4.8 5/8 15.9

* For plugging outlet of series SL-32, SL-33, SL-42, SL-43 injectors.

Compression nuts

  
Model Style Material Thread size A B C
    in.  in. mm in. mm in.  mm
66260 One piece Brass 5/16-24 5/16 7.9 1/2 12.7 1/8 3.2
66260-9 One piece Stainless steel 5/16-24 5/16 7.9 1/2 12.7 1/8 3.2
83924 Two piece Brass 5/16-24 5/16 7.9 1/2 12.7 1/8 3.2
83924-9 Two piece Stainless steel 5/16-24 5/16 7.9 1/2 12.7 1/8 3.2
66713 One piece Brass 7/16-24 7/16 11.1 5/8 15.9 1/4 6.3

Injector-operated air valve

For injector series SL-1 and SL-44.

Model Air inlet Air outlet
82272 1/8 in. NPTF(F) 1/8 in. NPTF (F)
 IJ7

Air lubricant spray devices

  
Model Use with series Air inlet Lubricant inlet Spray outlet Air consumption
in. NPTF(F) in.  in. CFM @PSI L/min bar
68421 SL1, SL44 1/4 1/4 in. NPTF(F) Fixed nozzle 3.5 40 99 2.8
69456 SL1, SL44 1/4 1/4 in. NPTF(F) Swivel nozzle 4.1 60 116 4.1
68587* Sl1, SL44 1/4 1/4 in. NPTF(F) Bulkhead mount 5.2 80 147 5.5
84204 SL32, SL33, SL42, SL43 1/8 7/16-24 Male Fixed nozzle Throttle controlled

* 3/16 in. (4.8mm) maximum bulkhead thickness.

Metric outlet adapters

Adapts injector outlet to 4 or 6 mm tubing.

  • Carbon steel construction
Model Tubing size Nut Ferrule
249281 4 mm 249277 249271
249282 6 mm 249274 249273
 IJ9

Feedline brush

Use to apply lubricant to chains and conveyors.

  • 1/8 in. NPT(F) inlet
  • 1 in. long
  • 5/8 in. surface area diameter
  • Aluminum body with nylon bristles
 IJ10

Injector Accessories Brochure