Arms and breakers move constantly and exert enough force to demolish a building or repair roads in a tough environment filled with grit and debris. Many OEMs recommend frequent lubrication of that hammer to achieve optimal performance and to hold down maintenance and repair costs. However, deadline-driven operators rarely halt work to grease the hammer, which can lead to breakdowns that grind down productivity and inflate repair expenses. Lincoln's HTL pumps make precise, consistent lubrication a reality. Now your operator can lubricate the hammer without leaving the cab. The pumps attach directly to the hammer, and your operator, with the push of a pedal, automatically sends a single shot of hydraulic fluid to the pump. Then the pump gives one shot of grease to lubricate the bearing points. When the operator's foot comes off the pedal, pressure releases the spring in the pump so it's ready to lubricate again.

Applications: construction OEMs, hydraulic hammer retrofits, demolition attachments and medium to larger breakers/hammers

• Operating temperature: -10°F to +180°F (-23°C to +80°C)
• Hydraulic port: SAE #4 (7/16-20 UNF) O-ring
• Pump outlet: SAE #4 (7/16-20 UNF) O-ring
• Weight (empty): 16.3 lbs. ( 7.4 kg)
• Weight (full): 17.3 lbs. (7.8 kg)
• Grease reservoir volume: 14.5 oz.
• Maximum lube outlet pressure: 6500 psig (450 bar)

Benefits:

• Withstands vibrations of an operating hammer
• Travels with hammer, perfect for rental equipment or hammers used on various machines
• Hydraulic power
• Pedal-actuated
• Attached grease fitting allows for manual filling and fast priming of pump
• Uses standard 14.5 oz grease cartridges and handles chisel paste
• To adjust output, metering plugs are available
  • 0.006 cu. in ( 0.1 cc) to 0.031 cu. in. (0.5 cc)
• Convenient visual low level indicator

*Optional metering plugs are available for different output volume. See Pump Output Adjustment chart below.