|
Map to Dean Industrial
| |
PE 40 Series
 |
APPLICATIONS:
Trico's continuous system pumps are designed for applications where
lubrication of critical components is needed on a continual basis,
rather than on a timed basis. Using control units, these pumps provide
lubricant at flow rates of 250 cc/min. Common applications include
injection molding, printing presses, punch presses, and milling
machines.
FEATURES:
|
• |
Return to tank
port available on 6, 8, and 20 liter models for returning unused
oil to reservoir. |
|
• |
Provided with
pressure gauge as standard. |
|
• |
Safety relief
valve assures reliable performance. |
|
• |
Pressure
switch, with reset button, shuts down pump if system pressure
drops below set level, protecting against
line or component failure. |
|
SPECIFICATIONS:
| Reservoir
Capacity |
3
Liter Plastic
6, 8, and 20 Liter Steel |
| Motor
Voltage |
110-1-50/60
Standard
220-1-50/60 Optional |
| Pump
Type |
Gear
Pump |
| Maximum
Pressure |
100
PSI |
| Output
Connection |
5/16-24
(f) |
|
Seals |
Buna-N |
| Operating
Temperature |
32-120ºF |
PE
Series Instructions
|
