|
Map to Dean Industrial
| |
PE-32 Series
 |
APPLICATIONS:
The PE-32 Series is the most versatile automatic cyclic pump available.
Both the lubricant dispensing time, and the time interval between cycles
is digitally controlled. With reservoir sizes up to 20 liters, these
pumps can handle systems with up to 100 lubrication points. Applications
include large printing presses and injection molding machines.
FEATURES:
|
• |
Low
level switch with alarm. |
|
• |
Pressure
gauge. |
|
• |
Adjustable
output cycle time of 1-999 seconds, flow rate of 250 cc/min. |
|
• |
Adjustable
interval time between lubrication cycles of 3-999 minutes. |
|
• |
Pressure
adjust valve. |
|
• |
Pressure
switch, with reset button, shuts down pump if system pressure
drops below set level, protecting against line or component
failure. |
|
SPECIFICATIONS:
| Reservoir Capacity |
3
Liter Plastic
6, 8, and 20 Liter Steel |
| Motor Voltage |
110-1-50/60 Standard
220-1-50/60 Optional |
| Pump Type |
Gear |
| Maximum Pressure |
140 PSI |
| Output Connection |
5/16-24 (f) |
| Seals |
Buna-N |
| Operating Temperature |
32-120ºF |
Design
Guide Work Sheet
PE-32 Series Instructions
|
