|
Map to Dean Industrial
| |
Drum Pump Filtration System
| |
 |
|
APPLICATIONS:
Actively filtering lubricants from storage drums can prevent
contamination related problems. Trico’s Drum Pump Filtration System can
prevent contamination or remove it when used in daily operations,
including filtering oil directly from the storage drum to fill totes and
transfer containers.
The Drum Pump Filtration System provides a dispensing nozzle for
continuous flow and metering of lubricants, and a protective rubber
nozzle cap to prevent contaminates from entering the nozzle when not in
use. This system is capable of delivering a flow up to 6.8 gpm and is
rated for use with lubricants up to a viscosity of 7,000 SUS, depending
on motor selection. The Drum Pump Filtration System comes standard with
a 10 micron absolute Beta>200 spin-on filter element and a sealing bung
adapter. Differential pressure gauges help specify the filter element
condition and the need for replacement.
The universal design of the Drum Pump Filtration System integrates a
quick change hand wheel design, allowing the motor to be transferred
from one Drum Pump Filtration System to another without buying
additional motors or removing the entire apparatus. This follows
industries best handling practices by avoiding cross contamination of
different lubricant types, reduces further particle contamination and
eliminates messy lubricant spills.
FEATURES:
| • |
Hand wheel
modular design for easy transfer of motor to other Drum Pump
Filtration Systems. |
| • |
Clear,
non-collapsible PVC for visual confirmation of flow. |
| • |
Differential
filter gauges to indicate filter element condition and
replacement. |
| • |
Dispensing
nozzle offers a controlled solution for safe lubricant transfer. |
|
SPECIFICATIONS:
| Specifications |
Tube
Assembly (P/N-30017) |
| Tank Size |
Seal-less / Centrifugal |
| Material |
Stainless Steel 316 |
| Tube Length |
39" |
| Maximum Temperature |
190ºF (90ºC) |
| Discharge Nozzle |
3/4" |
| Discharge Line |
1" Non-Collapsible PVC |
| Hose Line Length |
6' |
| Filter Media |
10 Micron Absolute Beta>200 |
| Replace Filter Media |
20 PSI Differential |
| Specifications |
Electric
Motor (P/N-30018) |
| Motor |
1.10 HP @ 10,000 RPM |
| Maximum Viscosity |
7,000 SUS |
| Flow Rate |
6.8 GPM |
| Electric Motor Rating |
110V 50-60 Hz, 8.5 A |
| Specifications |
Pneumatic
Motor (P/N-30019) |
| Motor |
3/4 HP @ 8,000 RPM |
| Maximum Viscosity |
3500 SUS |
| Flow Rate |
4.5 GPM |
| Inlet Pressure |
100 PSI max @ 28 CFM |
| Stall Pressure |
50 PSI |
| Air Inlet Connection
|
1/4" NPT Female |
|
