Lubrication Method Specialists       Home Up Search  

Home
Up

Map to Dean Industrial

 

 

 

 


 

 

 


 



Lincoln Applications for Beverage

Ambec Rinser Chain Oil Orsco (Doc File) The PET bottle rinser in a beverage plant receives the bottles from the depalletizer conveyor, rinses them with water and feeds the filler input conveyor. Downtime is significant and if the filler does not receive bottles, the entire packaging line is idle. We discovered that the replacement cost of this chain was very expensive, periodic chain adjustments were needed and bottles were mishandled when the chain stretched. The Ambec installation revealed that chain stretch was reduced by over 50%. In addition to chain life increase, we determined a significant increase in sprocket life with the Orsco spray system.
BW Bottle Rinser Bearing Grease QLS (Doc File) The Barry Wehmiller rinser application addressed the grease lubrication requirement for the bearings. Short bearing life resulted from the extreme amount of water contacting the bearings. Manual lubrication could not be performed at frequent intervals to properly lubricate the bearings. Bearing life was improved and lubrication labor reduced.
Knapp Slitter Chain Oil Orsco (Doc File) The Standard Knapp Slitter Sealer cuts the cardboard carton flaps, unfolds the flaps and seals the carton after full bottles are inserted. Manual chain lubrication was not performed on a timely basis and expensive annual rebuilds resulted. The Orsco chain oil spray system exceeded expectations and rebuild schedules, requiring one week lost production time, were no longer required. The original application has been operating over five years with no mechanical failures.
Filler Lift Cylinder Spray (Pdf File) This profile is focused on Crown Fillers, an application that is proving to be a successful target for our Orsco systems. Includes comparison of manual v. automatic method, ROI info and application images.
Beverage Process Segment Filler (Doc File) This document details the filler application including history, potential cost savings and info on current customers using our systems on fillers.
Beverage Segment Filler Cyl. Spray (Doc File) This document details the application history, application details and the ORSCO Oil Spray System solution applied for Filler Lift Cylinders.
Equipment Flow Chart (Pdf File) A typical beverage plant process flow chart. This is designed to illustrate the major areas involved in the process of packaging beverage products.
Beverage Plant Method Chart  (Xls File) An overview of each process area and the Lincoln system style that has proven to be best suited for the machinery found in that segment. This was determined by weighing the normal cost factors and offering the system with the best payback.
Lubrication System at Paulaner Brewery (Pdf File) Several thousand lubrication points are serviced at Paulaner Brewery in Germany. In 1993, Paulaner installed 1,100 lubrication points; one of the first complete centralized lubrication systems in the beverage industry. In 2007, Paulaner added on to the system to the multi story facility.