|
Map to Dean Industrial
| |
PowerMaster® III
AirBrake® Runaway Control and Pump Protection
Lincoln now offers its new AirBrake® Runaway Control and Pump Protection
device. Introduced by Lincoln more than a decade ago, the AirBrake® technology has unique pneumatic logic that uses pump cycle speed to stop
a runaway pump. The patented module saves customers the cost of
preventable repairs and lost production by stopping pumps when they lose
prime and start to accelerate toward damaging speeds. The new AirBrake®
is available three ways: a factory option on new PowerMaster® 4-1/4" and
larger air motors; an upgrade kit for existing AirBrakes®; or a separate,
complete model for PowerMaster® motors not originally equipped with
AirBrake®. (Models 85317, 273429, 94904, 94906, 94908, 94910, 273835,
274168)
AirBrake® Introduction Flyer
|
 |
Thermal
Pressure Relief Device
Managers of vehicle service centers can now turn to our new thermal
pressure relief device to protect against possible damage to their
closed pipe systems caused by thermal expansion. For example, as oil
warms, it expands and causes pressure—sometimes oil that was 300 psi
becomes 2,000 to 3,000 psi. Such pressure spikes can cause costly damage
if they exceed the design capacity of pipes and system components. Our
pressure relief valve returns fluid/material back to the tank, limiting
the pressure to protect the system.
Solutions Vol.5, No.3 |
 |
Our popular 3-inch, twin-post pressure
primer has been enhanced. Positive-priming force on the material:
Downward force of the follower forces material into the pump inlet,
assuring positive priming of high-viscosity materials. Follower has an
Elastomer seal: Twin blade wiper seals against the material container’s
sides, preventing drying and contamination of the material and wipes the
container’s sides clean.
Solutions Vol.5, No.3 |
 |
|
